Home » Products » Adhesive Anchoring »
Sure-Set® ACR-10 and ACR-28 Plus+ Epoxy Acrylate
Aerosmith’s Sure-Set® Epoxy Acrylate Plus+ adhesive anchors are specifically designed to resist static, wind or Seismic events. It is also ideally suited for high load and Heavy duty structural applications. It can be used with threaded rod, reinforcing bar, and steel dowels in solid base materials or in conjunction with an Aerosmith Stainless steel screen tube for hollow bases anchoring applications. Sure Set Plus + has not only been evaluated by ICC-ES it has been fire tested and approved to be used with potable water carrying the WQA’s Gold Seal of approval.
Suitable for use in CRACKED AND UNCRACKED CONCRETE, CATEGORY 1.
Description:
ACR10/28 Plus+ is an easy dispensing, rapid-curing, high strength anchoring adhesive which is formulated for use by trained professionals. Please refer to installation instructions and MSDS for additional detailed information.
Precaution:
Safety glasses and dust masks should be used when drilling holes into concrete, stone and masonry. Wear gloves and safety glasses when handling and dispensing adhesive. Do not sand the adhesive and create silica dust which could be inhaled. Avoid skin and eye contact. use a NIOSH-approved chemical mask to avoid respiratory discomfort if working indoors or in a confined area, or if sensitive to adhesive odors. Wash hands or other affected body parts with soap and water if skin contact occurs.
Flush eyes with plenty of water and seek immediate medical attention if eye contact occurs. Move to fresh air if adhesive odor begins to cause discomfort.
Important!
Before using, read and review Material Safety Data Sheet (MSDS). This product contains crystalline silica and as supplied does not pose a dust hazard. IARC classifies crystalline silica (quartz sand) as a Group I carcinogen based upon evidence among workers in industries where there has been long-term and chronic exposure (via inhalation) to silica dust; e.g. mining, quarry, stone crushing, refractory brick and pottery workers. This product does not pose a dust hazard; therefore, this classification is not relevant. However, if reacted (fully cured) product is further processed (e.g. sanded, drilled) be sure to wear proper respiratory and eye protection to avoid health risk.
Handling and Storage:
Store in a cool, dry, well-ventilated area at temperatures between 32°F (0°C) and 86°F (30°C). Keep away from excessive heat and flame. Keep partially used containers closed when not in use. Protect from damage. Store away from heat and light. Before use see expiration date on product label.
Do not use expired product. Partially used cartridges may be stored with hardened adhesive in the attached mixing nozzle.
Note: If the cartridge is reused, attach a new mixing nozzle and discard the initial quantity of the anchor adhesive as described in the setting instructions (steps #3 and #5).
Base Material:
- Concrete
- Hard natural stone
- Solid rock
- Solid masonry
Typical Applications Include:
- Structural Applications in Cracked and Uncracked Concrete
- Pinning Building Facades
- Post installed rebar connections
- Crash Barriers
- The attachment of Structural steel to concrete
- Railings
- Signage
- Rebar Doweling
- Sill plate attachments: suitable for horizontal, vertical and overhead anchoring applications
cable trays - Lighting Stanchions
- Conveyors
- Racking
Important Information:
- ICC-ES Evaluated ESR-5945
- Two Year Shelf Life when stored properly
- Certificated through WQA's Gold Seal program for drinking water system components
- For heavy anchoring and post-installed rebar connection
- Seismic rated
- Can be applied in dry, wet, submerged concrete or water filled bore holes
- High chemical resistance
- Low odor
- High bending and pressure strength
- Cartridge can be reused up to the end of the shelf life by either replacing the static mixer or resealing cartridge with the sealing cap
Approvals and Listing:
ICC-ES ESR-5945 Cracked and Uncracked Concrete Category 1
Code Compliant IBC Listed (International Building Code)
Code Compliant IRC Listed (International Residential Code)
Code Compliant FBC Listed (Florida Building Code)
Code Compliant FRC Listed (Florida Residential Code)
Code Compliant COLA Listed (City of Los Angeles)
Tested in accordance with AC308 and AC58 for use in structural concrete and masonry
ESR-5945 »
Installation Instructions:
Or:
